New FAA regulations require landowners to mark any towers between 50′ and 200′ on their property, as well as include the towers in a new database the FAA is developing.
Previously, towers under 200′ were not subject to any federal marking requirements, according to officials with the National Agricultural Aviation Association.
The new requirements are due to provisions in the FAA Extension, Safety and Security Act of 2016 and the FAA Reauthorization Act of 2018.
Under the provisions in these laws, meteorological evaluation towers (METs) meeting the requirements stipulated in the bills must be both marked and logged in to the FAA database. Communication towers of the same size have the option to be either be marked or logged in the FAA database.
The FAA Reauthorization Act of 2018 requires this database to be functional by October 2019. The FAA is also finalizing the marking requirements for these towers, but they are expected to be similar to the standards found in FAA Advisory Circular 70/7460-1L.
Officials with the National Agricultural Aviation Association encourage landowners to preemptively mark their towers and voluntarily log towers on their property into the FAA’s Daily Digital Obstacle File (Daily DOF). The Daily DOF is an obstacle database that contains mostly obstructions above 200′, with obstructions below 200′ submitted on a voluntary basis. The Daily DOF gives an obstruction’s location, height, and type of marking (if any). Information on the tower’s owner or property owner is not asked for or publicly given.
Association officials note that since 2008 there have been 22 tower-related agricultural aircraft accidents resulting in nine fatalities. The number of accidents and fatalities is even higher when other low-level operations, such as EMS-Medevac operations, are included.
An NAAA analysis of accidents from 2008 to 2018 across all sectors of general aviation found there were 40 tower-related accidents and incidents resulting in 36 fatalities. The data also shows many of those general aviation aviators did not collide with the main body of the obstruction itself, but the extremely difficult to see guy wires supporting the structure, illustrating the importance of installing high-visibility guy wire sleeves or spherical ball markers, officials said.
North Dakota farmer and aerial applicator Brian Rau has a 96′ RTK tower on his property. Short for “real time kinematic,” RTK towers supplement the GPS systems of automated ground-based farm equipment.
As an aerial applicator, Rau knows the importance of having such towers both marked and logged into appropriate FAA databases, regardless of legal requirements. He added florescent ball markers within the structure’s skeleton soon after it was converted from a communications tower to an RTK tower. This year Rau took the additional step of providing the coordinates of his tower to the FAA’s Obstacle Data Team for inclusion in the Daily DOF.
“Seeing the growth of communication towers in North Dakota and across the county, I knew it was important to both mark and properly log the tower,” Rau said. “Submitting the tower to be included in the FAA’s Daily Digital Obstacle File only took minutes and was well worth a few moments of my time.”
From a safety perspective, being transparent about the existence of low-level obstacles is vital to agricultural pilots and other aircraft flying in the airspace between zero and 400′, such as police and first responder aircraft, aerial firefighters and pipeline patrol pilots, NAAA officials said.
The FAA’s Digital Obstacle File (DOF) provides information about potential obstacles in pilots’ flight path before they take off. Once pilots download the FAA’s Digital Obstacle File or Daily DOF, they can import it into Geographic Information Systems applications, such as agricultural aviation applications.
FAA Advisory Circular 70/7460-1L on obstruction marking and lighting details the ways different types of obstructions may be marked. The document provides specifications on lighting systems, colors and light intensities. As an alternative to lighting, the document also explains tools for the “unlighted marking” of obstructions. This includes paint colors and patterns, as well as specifications for guy wire sleeves and high-visibility spherical markers.
Rau chose the latter option for marking his RTK tower.
“The ball markers seemed the easiest for an existing galvanized tower, and they really improved the visibility of the tower,” he said.
“Aerial applicators have been at the forefront of ensuring a safe airspace for low-flying pilots for years,” said NAAA Executive Director Andrew Moore. “We encourage farmers, landowners and tower companies to familiarize themselves with the dangers of unmarked, low-level towers. Towers in and around productive farmland may prevent a crop from being treated by air if it is too difficult or unsafe for an ag pilot to treat. As such, due consideration must be given to locating any type of tower on ag land. If a tower’s construction is imminent or already exists, it is highly encouraged that preemptive compliance with the forthcoming FAA regulations required by Congress occur.”
In addition to the human cost, a precedent has been established increasing the likelihood that landowners and tower manufacturers could be held financially liable for tower-related accidents, officials said.
In 2014, a milestone court settlement was reached when a group of defendants representing tower manufacturing, wind energy, land-owning and farming interests agreed to pay $6.7 million to the family of agricultural aviator Steve Allen to settle a wrongful death action brought against the tower entities for failing to mark a 197′ meteorological evaluation tower or make Allen aware of its location prior to his fatal collision with the tower in 2011. From eyewitness accounts, it was clear Allen never saw the unmarked tower before he struck it.
Landowners and farmers can submit an obstruction to the FAA’s Daily Digital Obstacle File by emailing the tower’s height and coordinates to 9-AJV-532-OBSTData-REQ@faa.gov.