Commuter Craft seeks paint scheme inspiration for “Version 2” of their unique aircraft.
Experimental Aircraft
SubSonex factory to host seminar during Oshkosh
Interesting in Sonex Aircraft’s sporty little SubSonex jet? Factory to host in-depth two-hour seminar July 26.
Picture of the Day: No, it’s not a glider — I hope
Steve Franseen submitted the following photo and note (as well as the headline): “Visiting a friend just before a beautiful dusk flight home in my experimental Cozy III. Across town in 11 minutes? No problem.” Would you like to have your photo featured as Picture of the Day? You can submit it via this form. […]
CubCrafters boosts production for 2019
YAKIMA, Washington – CubCrafters will significantly increase production of the line of light two-place tandem aircraft it manufactures in 2019, according to company officials. “Backcountry flying is increasing in popularity and CubCrafters has seen continuous sales growth since the introduction of the Light Sport Carbon Cub in 2009,” said CubCrafters’ Director of Sales Brad Damm. […]
Just 103 introduced
WALHALLA, SC – Just Aircraft has added a new ultralight aircraft design to its growing list of flying machines. Just 103 was created to conform to the FAA’s Part 103 criteria for an ultralight. The single seat aircraft weighs less than 254 pounds and flies with a top speed of 63 mph. The Just 103 […]
Rotorvox C2A to make US debut at SUN ‘n FUN 2018
Rotorvox Aero will display the Rotorvox C2A for the first time in the United States next week at SUN ‘n FUN, which runs from April 10-15. The C2A is an all-carbon monocoque gyroplane developed and produced in Germany by Rotorvox Lift Air GmbH, a division of LIFT Air in Eisenach, Germany. Powered by the Rotax […]
Pictures of the day: His new flying machine
Rafael Cortes sent in these photos, excitedly explaining they are of his new flying maching, a Rans S-10 Sakota. “It is actually from 1990, but never completed the Phase 1 of the Experimental Amateur Built Airworthiness,” he reports. “A friend of mine rescued it in 2013, and totally rebuilt it in 2015. My friend got […]
CubCrafters now accepts BitCoin
CubCrafters now accepts BitCoin, as well as other popular cryptocurrencies, as a payment method on orders for new and pre-owned aircraft and aircraft kits. The move supports progressive technologies and the international entrepreneur communities who use them, according to Jim Richmond, the company’s founder and CEO. “Our intent is to support our buyers’ payment preferences,” Richmond […]
Two firsts for two EAA Chapter 534 members
One member of Experimental Aircraft Association Chapter 534 recently received an Airworthiness Certificate for his aircraft building project from another chapter member who did his first airworthiness inspection as a newly minted Designated Airworthiness Representative. Steve Tilford from the Villages in Florida, has been working on his Van’s RV-7A off and on for 12 years […]